SLP Clutch Removal Tool Kit for Select Polaris UTV & Snowmobile Models - 20-315

This kit includes the specialized tools required to remove & install the primary clutch.
It includes:
SLP's Clutch Holding Tool which holds the primary clutch or Tied/BOSS UTV secondary clutch from turning during removal and installation.
SLP's Primary Clutch Puller which removes the primary clutch from the tapered crankshaft.

These specialized tools will work on many different Polaris models. Refer to the model specific factory service manual for the correct primary clutch removal/installation instructions and torque specifications. If installing a SLP clutch kit, refer to the installation instructions specific to that kit or contact Starting Line Products Inc. Tech Support.

*Wipe the clutch puller threads and tip clean to remove any dirt and apply clean grease to the threads and tip of clutch puller before each use.

*For extremely stuck clutches, it is recommended to fill the center cavity of the primary clutch with grease before inserting the clutch puller. This will increase the force being exerted on the clutch and will hydro lock the clutch off the tapered shaft.

This puller is not designed to be used with an impact driver which can cause damage to the puller, clutch and/or crank end. Puller damage from misuse or neglect is not covered under manufacturer's warranty.

Important Note: When pulling the primary clutch it is recommended to leave the belt installed. Without the belt installed, the clutch can come loose with such force that it can fly off the machine and cause injury.

Clutch puller works in place of OEM puller #2872085.

Proudly made in the USA.

Snowmobile Fitment:
1999 XCR 700
1999-03 XCR 800
2000-25 500 (All)
2000-25 600 (All)
2021-25 650 (All)
2000-25 700 (All)
2000-25 800 (All)
2019-25 850 (All except Boost Models)
2005-06 900 (All)

Polaris ACE Fitment:
2017-19 900 XC

Polaris RZR Fitment:
2011-14 XP 900
2012-14 4 XP 900
2015-18 900                        
2021-25 Trail 900
2015-21 S 900                     
2021-25 Trail S 900
2015-18 4 900                     
2018 S4 900
2016-21 S 1000                    
2021-25 Trail S 1000
2019-20 S4 1000
2014-23 XP 1000
2014-23 4 XP 1000

Polaris General Fitment:
2016-25 1000
2016-25 4 1000
2020-25 XP 1000
2020-25 XP 4 1000

Polaris Ranger Fitment:
2013-19 XP 900
2014-15 Crew 900 (Gas)
2016-19 Crew XP 900
2017 XP 1000
2017-18 Crew XP 1000